Siemens SIMATIC S7-300 Module data Function Manual

5 Statistics/export 03/2013
5.1 Multi-machine views
© Siemens AG 2006-2012 All Rights Reserved
5-242 SINUMERIK Integrate AMB, AMC, AMM, Function Manual (FH) - 03/2013
Function Description Type
Total Total number of events of all priorities: If the
control monitors for the machine were opened
with the "+" icon, the number of entries is also
displayed for each control monitor.
DISPLAY
Back Back to the basic menu "Statistics/Export" ACTION
5.1.3 Measuring series
Function description
On the basis of a measuring series of an examined machine, it is often not possible
to decide whether the viewed machine is in a good or a poor condition. This
applies in particular when only few measurement data is available for the inspected
machine. By comparing the measurement data between machines of the same
make, you might be able to assess even with few data records whether a machine
is in an acceptable condition.
Fig. 5-8: Initial state of the multiple-machine evaluation

Siemens SIMATIC S7-300 Module data Specifications

General

Series	S7-300
Manufacturer	Siemens
Protection Class	IP20
System	SIMATIC S7-300
Digital Inputs	Varies by module
Digital Outputs	Varies by module
Analog Inputs	Varies by module
Analog Outputs	Varies by module
Central Processing Unit	Varies by CPU model
Supply Voltage	24V DC or 120/230V AC
CPU Type	Varies (e.g., CPU 312, CPU 315, etc.)
Memory	Varies by CPU model
Communication Interfaces	MPI, PROFIBUS
Programming Languages	LAD, FBD, STL, SCL, GRAPH
Operating Temperature	0°C to 60°C
Storage Temperature	-40°C to 70°C
Relative Humidity	10% to 95% (non-condensing)