Siemens simatic s7-400 FM 450-1 - The FM 450-1 software

Product Overview
1.5 The FM 450-1 software
Counter module FM 450-1
16 Manual, 02/2014, A5E03648739-02
1.5
The FM 450-1 software
Software packages of the FM 450-1
You will require the software package on the supplied CD to integrate the FM 450-1 into the
S7-400. It includes:
● Parameterization software with parameterization interfaces
● Software for the CPU (blocks)
● Documentation
parameter assignment screen forms
The FM 450-1 is adapted to the respective task via parameters. These parameters are
stored in an SDB and transferred to the module by the CPU.
The parameters can be determined via the parameter assignment screen forms. These
parameter assignment screen forms are installed on your programming device and opened
in STEP 7.