87
2.14 Storage
During storage, a temperature range between +10°C and
+35 °C is recommended in order to prevent premature
aging of components, particularly the electrolytic capacitors.
For longer storage periods, it is recommended that voltage
be applied to the device power supply for one or two days
every other year, in order to regenerate the electrolytic
capacitors. The same is valid before the device is finally
installed.
2.15 Electrical Connection
WARNING!
Some of the following steps are carried out in the presence of
hazardous voltages. They must be performed only by qualified
personnel who are thoroughly familiar with safety
regulations and precautionary measures; and pay due
attention to them.
To Next Page
Loading...
