Siemens SIMEAS P 7KG7100 - Configuration Overview; Operating Notes; Button Functions

95
2.18 Configuration Overview
2.18.1 Operating Notes
This chapter describes the basic setting options of the SIMEAS P
that are made via the front buttons (only for the devices # 7KG7500,
7KG7600, and 7KG7610). For the devices # 7KG7100 and 7KG7200
you have to use the PC software Simeas P Parameterization.
The Main Menu of the programming level can be accessed from
the Measured Values screens, the Min-Max Values screens or the
Phasor Diagram screen via the "ENTER” button.
In addition, the Main Menu of the programming level can be
accessed from the Harmonics screen by holding down the "ENTER"
button, or from the Oscilloscope Menu by selecting "Main Menu"
and pressing the "ENTER" button.
2.18.2 Button Functions
The following functions are performed via the
buttons:
• Moving the cursor to the entry line.
• Scrolling through selection lists when entering settings.
• Selecting numbers when entering numerical values.
If the buttons are held down, the scrolling continues automatically.
The selected line, setting or number is confirmed by pressing the
"ENTER" button.
ENTER