Siemens SIMEAS R - Page 161

12
12.11 Slot Description
161Digital Fault Recorder, SIMEAS R-PMU, Manual
E50417-H1076-C360-A5, Release 10.2012

Select under Display in OSCOP P whether the values of the channel are to be displayed in
the OSCOP P Evaluate module.
 In the X axis box you can enter the process variable value at which the time axis is to appear
in the OSCOP P Evaluate module.
 The display curve for low measured values can be improved by a Gain factor that acts like a
zoom in the y direction. Enter the value in the Gain box.
Note
The parameters Display in OSCOP P, X axis and Gain do not influence the display of PMU data
in OSCOP P.