04/96
Siemens AG 2001 All rights reserved 6FC5198–jAB40
1–105
SINUMERIK 840C / SIMODRIVE 611–D (DA)
105030 Except... 386–Error... Task...
105031 CS: ... EIP: ...
105032 SS: ... ESP: ...
105033 EFLAGS: ...
105034 DS: ... ES: ...
105035 FS: ... GS: ...
105036 EAX: ... EBX: ...
105037 ECX: ... EDX: ...
105038 ESI: ... EDI: ...
105039 EBP: ... LDTR: ... CR0: ...
Permanent
See alarm 105020
Under these alarm numbers the register contents of the NCK crash is entered in the alarm list
See alarm 105020
Note:
These alarms are displayed only for a short period of time. They are entered in the alarm list.
105040 Wrong text number for message no. ... Acknowledgement key
Power up
Text number 0 understood.
Error during conversion of ASCII files. A message has a text number greater than or equal to the number of texts.
Eliminate error in the alarm configuration.
SW 5 and higher
105041 Incorrect reference to message description for no. ... Acknowledgement key
Power up
Reference to the first message description
Error during conversion of ASCII files. A message has a reference to a message line description greater than or
equal to the number of message line descriptions.
Eliminate error in the alarm configuration
SW 5 and higher
Scan
Effect
Explanation
Remedy
Scan
Effect
Explanation
Remedy
Note
Scan
Effect
Explanation
Remedy
Note
1 Alarms
1.5.1 Alarm description
To Next Page
Loading...
