Type spectrum 02.00
2-6 Siemens AG 6RX1700-0AD76
SIMOREG DC Master Operating Instructions
Options Codes Order No.
CB2 Communications board with interface for CAN protocol
3)
The replacement CBC board should be used for new
applications
Description
6SE7090-0XX84-0AE0
6SE7087-6CX84-0AK0
T100 module incl. hardware operating instructions without
software module)
3)
6SE7090-0XX87-0BB0
Hardware operating instructions for T100 6SE7080-0CX87-0BB0
MS100 "Universal Drive“ software module for T100 (EPROM)
without manual
6SE7098-0XX84-0BB0
Manual for MS100 "Universal Drive" software module
German 6SE7080-0CX84-0BB1
English 6SE7087-6CX84-0BB1
French 6SE7087-7CX84-0BB1
Spanish 6SE7087-8CX84-0BB1
Italian 6SE7087-2CX84-0BB1
T300 technology board with 2 connecting leads, SC58 and
SC60, terminal block SE300 and hardware operating
instructions
3)
- 6SE7090-0XX84-0AH0
T400 technology board (incl. short description)
3)
T400 hardware and configuring manual
- 6DD1606-0AD0
6DD1903-0EA0
Operating instructions for SIMOREG DC Master
Operating instructions in German D00 6RX1700-0AD00
Operating instructions in Italian D72 6RX1700-0AD72
Operating instructions in English D76 6RX1700-0AD76
Operating instructions in French D77 6RX1700-0AD77
Operating instructions in Spanish D78 6RX1700-0AD78
Operating Instructions and SIMOVIS in all the above
languages available on CD-ROM
D64 6RX1700-0AD64
1) The SBP, SLB and CBP boards can be ordered under two different numbers, i.e.
• under the order number of the board without accessories (such as connectors and Short Guide)
• as a retrofit kit: Board with connectors and Short Guide
Board Order number of board (w/o accessories) Order number of retrofit kit
ADB 6SE7090-0XX84-0KA0 6SE7010-0KA00
SBP 6SE7090-0XX84-0FA0 6SE7010-0FA00
EB1 6SE7090-0XX84-0KB0 6SE7010-0KB00
EB2 6SE7090-0XX84-0KC0 6SE7010-0KC00
SLB 6SE7090-0XX84-0FJ0 6SE7010-0FJ00
CBP2 6SE7090-0XX84-0FF5 6SE7010-0FF05
CBC 6SE7090-0XX84-0FG0 6SE7010-0FG00
To Next Page
Loading...
