Contents 02.00
0-4 Siemens AG 6RX1700-0AD76
SIMOREG DC Master Operating Instrctions
Page
6.4.18 Converters: 950A to 1000A, 4Q 6-40
6.4.19 Converters: 1100 to 1200A, 4Q 6-41
6.4.20 Converters: 1500 to 2000A, 4Q 6-42
6.5 Field supply 6-44
6.6 Fuses and commutating reactors 6-47
6.6.1 Commutating reactors 6-47
6.6.2 Fuses 6-47
6.6.2.1 Recommended fuses for field circuit 6-47
6.6.2.2 Fuses for armature circuit 6-47
6.6.2.2.1 Converters 1Q: 400V, 575V, 690V and 830V 6-47
6.6.2.2.2 Converters 1Q: 460V 6-48
6.6.2.2.3 Converters 4Q: 400V, 575V, 690V and 830V 6-49
6.6.2.2.4 Converters 4Q: 460V 6-50
6.6.2.3 F1 and F2 fuses in the power interface 6-50
6.7 Terminal arrangement 6-51
6.8 Terminal assignments 6-54
7 Start-up
7.1 General safety information 7-1
7.2 Operator control panels 7-3
7.2.1 Simple operator control panel (PMU) 7-3
7.2.2 User-friendly operator control panel (OP1S) 7-4
7.3 Parameterization procedure 7-6
7.3.1 Parameter types 7-6
7.3.2 Parameteratization on simple operator control panel 7-6
7.4 Reset to default value and adjust offset 7-8
7.5 Start-up procedure 7-9
7.6 Manual optimization (if necessary) 7-17
7.6.1 Manual setting of armature resistance R
A
(P110) and
armature inductance L
A
(P111) 7-17
7.6.2 Manual setting of field resistance R
F
(P112) 7-18
7.7 Starting up optional supplementary boards 7-19
7.7.1 Procedure for starting up technology boards (T100, T300, T400) 7-19
7.7.2 Sequence of operations for starting up PROFIBUS boards (CB1, CBP, CBP2) 7-20
7.7.3 Sequence of operations for starting up CAN bus boards (CB2, CBC) 7-27
7.7.4 Procedure for starting up SIMOLINK boards (SLB) 7-33
7.7.5 Procedure for staring up expansion boards (EB1 and EB2) 7-36
7.7.6 Procedure for starting up the pulse encoder board (SBP) 7-37
8 Function diagrams
To Next Page
Loading...
