Siemens SIMOREG DC Master 6RA7018-6DS22 - Function Diagrams; Faults; Alarms

Contents 02.00
0-6 Siemens AG 6RX1700-0AD76
SIMOREG DC Master Operating Instrctions
Page
9.18 Field reversal 9-68
9.18.1 Direction of rotation reversal using field reversal 9-69
9.18.2 Braking with field reversal 9-70
9.19 Status description of some bits of status word ZSW1 9-72
10 Faults / Alarms
10.1 Fault messages 10-1
10.1.1 General information about faults 10-1
10.1.2 List of fault messages 10-2
10.1.2.1 Supply faults 10-2
10.1.2.2 Interface error 10-5
10.1.2.3 External faults 10-7
10.1.2.4 Fault messages from motor sensors 10-8
10.1.2.5 Drive faults 10-8
10.1.2.6 External faults 10-9
10.1.2.7 Drive faults 10-9
10.1.2.8 Start-up faults 10-12
10.1.2.9 External faults 10-17
10.1.2.10 Start-up faults 10-17
10.1.2.11 Hardware faults 10-18
10.1.2.12 Internal faults 10-19
10.1.2.13 Communication errors with supplementary boards 10-22
10.1.2.14 Faults messages from supplementary boards 10-23
10.2 Alarms 10-24
11 Parameter list
12 List of connectors and binectors
12.1 Connector list 12-1
12.2 Binector list 12-22
13 Maintenance
13.1 Procedure for updating software (upgrading to a new software version) 13-2
13.2 Replacement of components 13-3
13.2.1 Replacement of fan 13-3
13.2.2 Replacement of PCBs 13-6
13.2.3 Replacement of thyristor modules on converters up to 1200A 13-7
13.2.4 Replacement of fuses and thyristor assemblies on converters of 1500A and above 13-8