Introduction
1.3 Frequently required parameters
Frequency inverter
14 Operating Instructions, 08.10. 2008, t.b.d.
Table 1- 6 This is how you select the source for the speed setpoint
Parameter Description
P1000 = 0: No main setpoint
1: MOP setpoint
2: Analog setpoint (factory setting for non-fieldbus-capable frequency inverters)
3: Fixed frequency
4: USS on RS 232
5: USS on RS 485
6: Fieldbus (factory setting for fieldbus-capable frequency inverters)
7: Analog setpoint 2
To Next Page
Loading...
