Siemens Sinamics G120 CU240S DP - Power Module Dimensions and Mounting

Connection
3.3 Mounting Power Modules
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
31
3.3.1 Dimensions, hole drilling templates, minimum clearances, tightening torques
Overview of dimensions and hole drilling templates for the Power Modules
0.37 kW … 1.5 kW 2,2 kW … 4 kW 7,5 kW … 15 kW
Retaining type
• 2 x M4 bolts
• 2 x M4 nuts
• 2 x M4 washers
Retaining type
• 4 x M4 bolts
• 4 x M4 nuts
• 4 x M4 washers
Retaining type
• 4 x M5 bolts
• 4 x M5 nuts
• 4 x M5 washers
Tightening torques
• 2.5 Nm (22.1 lbf.in)
Tightening torques
• 2.5 Nm (22.1 lbf.in)
Tightening torques
• 2.5 Nm (22.1 lbf.in)
Distances from other devices
• Lateral: 30 mm (1.18 inch)
• Top/bottom: 100 mm (3.93 inch)
Distances from other devices
• Lateral: 40 mm (1.57 inch)
• Top/bottom: 100 mm (3.93 inch)
Distances from other devices
• Lateral: 50 mm (1.96 inch)
• Top/bottom: 125 mm (4.92 inch)
Depth
• Standalone: 145 mm (5.71 inch)
• With CU240E: 187 mm (7.36 inch)
• With CU240S: 208 mm (8.19 inch)
Depth
• Standalone: 165 mm (6.50 inch)
• With CU240E: 207 mm (8.15 inch)
• With CU240S: 228 mm (8.98 inch)
Depth
• Standalone: 185 mm (7.28 inch)
• With CU240E: 227 mm (8.94 inch)
• With CU240S: 248 mm (9.76 inch)