Commissioning
4.5 Commissioning with STARTER
Frequency inverter
Operating Instructions, 08.10. 2008, t.b.d.
59
4.5.1 Creating a STARTER project
Description
A frequency inverter can be parameterized in a user-friendly fashion using the Project
Wizard. The commissioning procedure described here follows the Project Wizard. The PC
communicates with the frequency inverter via the USS interface.
● Switch on the frequency inverter supply voltage
● Launch the STARTER commissioning tool.
● Use the Project Wizard and click on the "Find drive units online ..."
Figure 4-4 Start field
● In the screen that follows (not shown here), enter a meaningful name into your project,
e.g. "Basic Commissioning" and click on "Continue". The following dialog box is
displayed.
Figure 4-5 Setting the PC interface
To Next Page
Loading...
