Commissioning
4.5 Commissioning with STARTER
Frequency inverter
70 Operating Instructions, 08.10. 2008, t.b.d.
4.5.4 Commissioning the application
Description
● You can now commission your application using the "Drive Navigator" screens or by
using the functions available in the project tree.
● Save your settings so that they are protected against power failure (see below).
● Once you have commissioned your application, disconnect the online connection
between the PC and converter by clicking on
.
Figure 4-16 Application communication
Saving data so that it is protected against power failure
● In the project tree, select your SINAMICS project
● Double-click on "Drive Navigator".
● Select "Commissioning" in the working area
● In the dialog box, select "Save data in the drive (RAM to ROM)".
You can now disconnect the online connection with
"Disconnect from target system"
To Next Page
Loading...
