List of Parameters
Parameters
1-109
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Drive object identification
Index: [0] = Company
[1] = Drive object type
[2] = Firmware version
[3] = Firmware date (year)
[4] = Firmware date (day/month)
[5] = Profidrive drive object class
[6] = Profidrive drive object subclass 1
[7] = Drive Object ID (DO-ID)
[8] = unused
[9] = unused
[10] = Firmware path/hotfix
Description: Contains 100 parameter numbers index 0 - 99.
Index: [0] = Parameter 1
[1] = Parameter 2
[2] = Parameter 3
[3] = Parameter 4
[4] = Parameter 5
[5] = Parameter 6
[6] = Parameter 7
[7] = Parameter 8
[8] = Parameter 9
[9] = Parameter 10
Note: The parameter list array has 2 elements to reduce memory consumption. On each access to an element index 0-
99, the individual result is determined dynamically by the 'BeforeAccess' function. The last element contains the
number of the following parameter array, 0 indicates end of list
Description: Contains 100 parameter numbers index 100 - 199.
Index: [0] = Parameter 1
[1] = Parameter 2
[2] = Parameter 3
[3] = Parameter 4
[4] = Parameter 5
[5] = Parameter 6
[6] = Parameter 7
[7] = Parameter 8
[8] = Parameter 9
[9] = Parameter 10
Note: The parameter list array has 2 elements to reduce memory consumption. On each access to an element index 0-
99, the individual result is determined dynamically by the 'BeforeAccess' function. The last element contains the
number of the following parameter array, 0 indicates end of list
r0975[0...10] DO identification / DO ident.
CU240S PN Access level: 3 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r0980[0...99] List of avaiable parameter numbers / Paramter list
Access level: 2 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
r0981[0...99] List of avaiable parameter numbers / Paramter list
Access level: 2 P-Group: Communications Data type: Unsigned16
Unit: - Data set: -
To Next Page
Loading...
