Siemens Sinamics G120 Series - p1010[0...2] Fixed frequency 10; Fixed frequency 10; p1011[0...2] Fixed frequency 11; Fixed frequency 11; p1012[0...2] Fixed frequency 12; Fixed frequency 12; p1013[0...2] Fixed frequency 13; Fixed frequency 13

List of Parameters
Parameters
1-117
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
Description: Defines fixed frequency setpoint 10.
Note: See parameter P1001 (fixed frequency 1).
Description: Defines fixed frequency setpoint 11.
Note: See parameter P1001 (fixed frequency 1).
Description: Defines fixed frequency setpoint 12.
Note: See parameter P1001 (fixed frequency 1).
Description: Defines fixed frequency setpoint 13.
Note: See parameter P1001 (fixed frequency 1).
Description: Defines fixed frequency setpoint 14.
Note: See parameter P1001 (fixed frequency 1).
p1010[0...2] Fixed frequency 10 / Fixed frequency 10
Access level: 2 P-Group: Setpoints Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-650.00 [Hz] 650.00 [Hz] 45.00 [Hz]
p1011[0...2] Fixed frequency 11 / Fixed frequency 11
Access level: 2 P-Group: Setpoints Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-650.00 [Hz] 650.00 [Hz] 50.00 [Hz]
p1012[0...2] Fixed frequency 12 / Fixed frequency 12
Access level: 2 P-Group: Setpoints Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-650.00 [Hz] 650.00 [Hz] 55.00 [Hz]
p1013[0...2] Fixed frequency 13 / Fixed frequency 13
Access level: 2 P-Group: Setpoints Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-650.00 [Hz] 650.00 [Hz] 60.00 [Hz]
p1014[0...2] Fixed frequency 14 / Fixed frequency 14
Access level: 2 P-Group: Setpoints Data type: Floating Point
Quick comm. NO Active: YES Data set: DDS
Can be changed: U, T
Min Max Factory setting
-650.00 [Hz] 650.00 [Hz] 65.00 [Hz]