Siemens Sinamics G120 Series - 2.5 Internal Setpoint Source

Internal Setpoint Source
Function diagrams
2-335
© Siemens AG 2007 All Rights Reserved
SINAMICS G120 Control Units CU240S, Edition 05/2007
2.5 Internal Setpoint Source
Function diagrams
3100 – Motor Potentiometer (MOP) 2-336
3200 – Fixed Frequency (FF) Direct Selection (P1016 = 1) 2-337
3210 – Fixed Frequency (FF) Binary Selection (P1016 = 2) 2-338
3300 – Fixed PID setpoint, Direct Selection (P2216 = 1) 2-339
3310 – Fixed PID setpoint, Binary Selection (P2216 = 2) 2-340
3400 – PID Motor Potentiometer (PID-MOP) 2-341