Siemens SINAMICS G120 - 3.12 Setpoint channel

SINAMICS G120 Control Units CU240B-2/CU240E-2
List Manual (LH11), 01/2016, A5E33839529
649
3 Function diagrams
3.12 Setpoint channel
3.12 Setpoint channel
Function diagrams
3001 – Overview 650
3010 – Fixed speed setpoints, binary selection (p1016 = 2) 651
3011 – Fixed speed setpoints, direct selection (p1016 = 1) 652
3020 – Motorized potentiometer 653
3030 – Main/supplementary setpoint, setpoint scaling, jogging 654
3040 – Direction limitation and direction reversal 655
3050 – Skip frequency bands and speed limitations 656
3060 – Basic ramp-function generator 657
3070 – Extended ramp-function generator 658
3080 – Ramp-function generator selection, status word, tracking 659