9. STARTER responds to the reset password with the following message:
Close the message.
10.Press the "Cancel" button.
You have reset the password for the safety functions.
Procedure with Startdrive
Precondition
You know the actual password for the safety functions.
Procedure
Proceed as follows to reset the password for the safety functions:
1. Go online.
2. Open the screen form of the safety functions.
3. Press the "Start safety commissioning" button.
4. Enter the current password for the safety functions.
5. Set the new password = 0.
Commissioning
5.7 Resetting the password for the safety functions
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
110 Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
To Next Page
Loading...
