Siemens SINAMICS G120 - Page 22

Commissioning
4.2 Commissioning with BOP-2 operator panel
CU240B-2 and CU240E-2 Control Units
22 Compact Operating Instructions, 04/2015, A5E35792002B AA
9.
Select the application:
VEC STD
Constant load: Typical
applications include belt conveyor
drives.
PUMP FAN
Speed
-dependent load: Typical applications include
pumps and fans.
10.
Select the default setting for the
interfaces of the inverter that is suita-
ble for your application. The available default settings can be found in
the operating instructions, see: Manuals for your inverter (Page 31).
11.
Minimum and maximum motor speed
12.
13.
Motor ramp
-up time
14.
Motor ramp
-down time
15.
Ramp
-down time for the OFF3 command
16.
Complete the basic commissioning:
16.1.
Switch over the d
isplay using an arrow key: nO → YES
16.2.
Press the OK key.
You have entered all of the data that is necessary for the basic commissioning of your
inverter.