Siemens SINAMICS G120 - Page 728

Index
C-728
© Siemens AG 2011 All Rights Reserved
SINAMICS G120 Control Units CU230P-2 Parameter Manual (LH9), 01/2011
Function diagrams Internal control/status
words
Control word 1 (r0054), 2-555
Control word 2 (r0055), 2-556
Control word, faults/alarms, 2-564
Control word, sequence control, 2-550
Control word, setpoint channel, 2-552
Control word, speed controller, 2-557
Sequence control - Missing enable sig-
nals, 2-566
Status word 1 (r0052), 2-553
Status word 2 (r0053), 2-554
Status word, closed-loop control, 2-559
Status word, current control, 2-560
Status word, faults/alarms 1 and 2, 2-565
Status word, monitoring functions 1,
2-561
Status word, monitoring functions 2,
2-562
Status word, monitoring functions 3,
2-563
Status word, sequence control, 2-551
Status word, speed controller, 2-558
Function diagrams Overview
Internal control/status words, data sets,
2-506
Monitoring functions, faults, alarms, 2-511
PROFIdrive/PROFIBUS, 2-505
Setpoint channel, 2-507
Vector control, current control, 2-510
Vector control, speed control and genera-
tion of the torque limits, 2-509
Vector control, V/f control, 2-508
Function diagrams PROFIdrive
PROFIBUS, addresses and diagnostics,
2-529
PZD receive signals interconnection,
2-531
PZD send signals interconnection, 2-535
Receive telegram, free interconnection via
BICO (p0922 = 999), 2-539
Send telegram, free interconnetion via
BICO (p0922 = 999), 2-540
Status words, free interconnection, 2-541
STW1 control word interconnection
(p2038 = 0), 2-533
STW1 control word interconnection
(p2038 = 2), 2-532
STW3 control word interconnection
(p2038 = 0), 2-534
Telegrams and Process Data (PZD),
2-530
ZSW1 status word interconnection
(p2038 = 0), 2-537
ZSW1 status word interconnection
(p2038 = 2), 2-536
ZSW3 status word interconnection
(p2038 = 0), 2-538
Function diagrams Setpoint channel
Basic ramp-function generator, 2-574
Direction limitation and direction reversal,
2-572
Extended ramp-function generator, 2-575
Fixed speed setpoints, binary selection
(p1016 = 2), 2-568
Fixed speed setpoints, direct selection
(p1016 = 1), 2-569
Main/supplementary setpoint, setpoint
scaling, jogging, 2-571
Motorized potentiometer, 2-570
Ramp-function generator selection, status
word, tracking, 2-576
Skip frequency bands and frequency limi-
tations, 2-573