Siemens SINAMICS G130 - Page 145

Commissioning
5.3 Procedure for commissioning via STARTER
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
145
Configuring the motor – Selecting the type of connection
Figure 5-18 Configuring the motor – Selecting the type of connection
⇒
Under
Connection type:
, select whether the motor is connected in a star or delta
connection.
The values for the rated motor voltage (p0304) and rated motor current (p0305) are
automatically converted according on the selected connection type.
⇒
Click on
Continue >
to configure the motor holding brake