Functions, monitoring, and protective functions
9.2 Drive functions
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
445
Starting the web server
Preconditions
● The web server is already active in the factory settings.
● A functional commissioned drive project.
● PG/PC is connected to the Control Unit (to the target device).
1. Enter the IP address of the SINAMICS drive in the address line of the Internet browsers
(e.g. http://169.254.11.22).
Confirm with <Return>.
The start page of the Web server opens. The most important data of your drive is
displayed.
Figure 9-10 Start page of the web server
2. Enter the login name (e.g. SINAMICS) top left and the password if necessary.
In the factory setting, only the "SINAMICS" user is enabled, a password is not allocated.
3. Click "Login" to confirm the input.
To Next Page
Loading...
