Siemens SINAMICS G130 - Extended Monitoring Functions

Functions, monitoring, and protective functions
9.3 Extended functions
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
467
Release/apply brake
•
p0855
BI: Unconditionally release holding brake
•
p0858
BI: Unconditionally apply holding brake
•
p1216
Motor holding brake release time
•
p1217
Motor holding brake closing time
•
p1218[0...1]
BI: Release motor holding brake
•
p1219[0...3 ]
BI: Immediately apply motor holding brake
•
p1220
CI: Release motor holdin
g brake, signal source, threshold
•
p1221
Release motor holding brake, threshold
•
p1277
Motor holding brake, delay, braking threshold exceeded
•
p1279
BI: Motor holding brake OR/AND logic operation
Brake monitoring functions
•
p1222
BI: Motor holding brake,
feedback signal, brake closed
•
p1223
BI: Motor holding brake, feedback signal, brake released
Configuration, control/status words
•
p1215
Motor holding brake configuration
•
r1229
CO/BO: Motor holding brake status word
•
p1275
Motor holding brake control wor
d
•
p1278
Motor holding brake type
9.3.4
Extended monitoring functions
Description
The "extended monitoring functions" function module enables additional monitoring
functions:
● Speed setpoint monitoring: |n_set| ≤ p2161
● Speed setpoint monitoring: n_set > 0
● Load monitoring