Maintenance and servicing
11.3 Maintenance
Inverter chassis units
Operating Instructions, 07/2016, A5E00331449A
513
Using crane lifting lugs to transport power blocks
Crane lifting lugs
The power blocks are fitted with crane lifting lugs for transportation on a lifting harness in the
context of replacement.
The positions of the crane lifting lugs are illustrated by arrows in the figures below.
Damage to the device due to improper transport
Improper transport can subject the power block housing or the busbars to mechanical
loads, which damage the device.
• When transporting the power blocks, use a lifting harness with vertical ropes or chains.
• Do not use the power block busbars to support or secure lifting harnesses.
Figure 11-2 Crane lifting lugs on FX, GX power block
To Next Page
Loading...
