Siemens SINAMICS G180 - 4 Assignment of the Message Groups for the Bit Generators

Display messages
05/2020, 4BS0576F-004
43
Assignment of the message groups for the bit generators
4
In the function of the bit generators "P-BIT GENERATOR1 to 20", you can also select message groups "MessGr ..." in addition
to various single messages.
The following table shows the assignment of the various messages, warnings, faults and inverter faults to the message groups.
Message group
Single message
MessGr flt. gen.
MessGr flt. syst.
MessGr flt. DCcrt
MessGr flt>T-ins.
MessGr flt<T-ins.
MessGr flt>T-cool
MessGr flt<T-cool
MessGr flt T-reac
MessGr flt. PS
MessGr flt. curr
MessGr ft<V-mains
MessGr ft FW/CB08
MessGr wrg. gen.
MessGr wrg. syst.
MessGr wrg>T-ins.
MessGr wrg<T-ins.
MessGr wrg>T-cool
MessGr wrg<T-cool
MessGr wrg T-reac
MessGr suppr.flt.
MessGr no ON
Msg-Nr
Text in line 1
Text in line 2
Selection text
2004 Fault S1:3 not off x
2038 Operation locked n-motor <> Rotation x
2043 Operation locked Cabinet heater
x
2044 Operation locked CoolgWaterHeater x
2045 !! Prewarning !! actual speed Wrg>Actual speed x x
2049 !! Prewarning !! Fault Synch. MSC x
2083 !! Prewarning !! T-cabinet too low x x
2089 !! Prewarning !! T-cooler 2 too low x x
2090 !! Prewarning !! T-cooler 3 too low
x
x
2091 !! Prewarning !! T-cooler 4 too low x x
2092 !! Prewarning !! T-cooler 5 too low x x
2093 !! Prewarning !! T-cooler 2 too high
x
x
2094 !! Prewarning !! T-cooler 3 too high x x
2095 !! Prewarning !! T-cooler 4 too high x x
2096 !! Prewarning !! T-cooler 5 too high x x
2100 !! Prewarning !! Current asymmetry U x
2101 !! Prewarning !! Current asymmetry V x
2102 !! Prewarning !! Current asymmetry W
x