Siemens SINAMICS G180 - Page 54

Assignment of the message groups for the bit generators
Display messages
52 05/2020, 4BS0576F-004
Message group
Single message
MessGr flt. gen.
MessGr flt. syst.
MessGr flt. DCcrt
MessGr flt>T-ins.
MessGr flt<T-ins.
MessGr flt>T-cool
MessGr flt<T-cool
MessGr flt T-reac
MessGr flt. PS
MessGr flt. curr
MessGr ft<V-mains
MessGr ft FW/CB08
MessGr wrg. gen.
MessGr wrg. syst.
MessGr wrg>T-ins.
MessGr wrg<T-ins.
MessGr wrg>T-cool
MessGr wrg<T-cool
MessGr wrg T-reac
MessGr suppr.flt.
MessGr no ON
Msg-Nr
Text in line 1
Text in line 2
Selection text
3451 !! OFF 2 !! Interruption BUS x
3452 !! OFF 2 !! BUS Hardware x
3453 !! OFF 2 !! Contr. AD missing x
3454 !! OFF 2 !! Interruption RS485 x
3455 !! OFF 2 !! Interr. RS485 (X26) x
3461 !! Emergency stop !! Interruption BUS x
3462 !! Emergency stop !! BUS Hardware x
3463 !! Emergency stop !! Contr. AD missing x
3464 !! Emergency stop !! Interruption RS485 x
3465 !! Emergency stop !! Interr. RS485 (X26) x
3471 !! OFF 1 !! Interruption BUS x
3472 !! OFF 1 !! BUS Hardware x
3473 !! OFF 1 !! Contr. AD missing x
3474 !! OFF 1 !! Interruption RS485 x
3475 !! OFF 1 !! Interr. RS485 (X26) x
3597 System DC V-diff. too high x
3598 System Feedb.AC ctctr.missg x
3599 System Feedb.DC ctctr.missg x
3607 Terminal X2:8 inactive x
3609 Contactor feedback missing x
3610 Mains voltage faulty x
4041 !! Ctrl.inhib. !! Interruption BUS x
4042 !! Ctrl.inhib. !! BUS Hardware x
4043 !! Ctrl.inhib. !! Contr. AD missing x
4044 !! Ctrl.inhib. !! Interruption RS485 x
4045 !! Ctrl.inhib. !! Interr. RS485 (X26) x
4051 !! Speed OFF !! Interruption BUS x