Siemens SINAMICS G180 - Display Buttons

Introduction
1.5 Specific features
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
11
Display buttons
Table 1- 2 Display of special markings
Description in the text
Meaning
<Arrow up>
Press the button on the control panel once.
<Arrow up_ Arrow up> Press the button on the control panel twice.
<S+I>
Press both buttons simultaneously.
Display text
"P-SYSTEM DATA"
Text shown in the control panel display is presented like this.
If you have to branch in a menu, the text will be shown as follows:
"
P-MACHINE POWER CONV/P-speed default/t-accel.". "P-MACHINE POWER CONV"
symbolizes the main menu, "P-speed default" the submenu and "t-accel." the parameter.
In this case, you parameterize the accelerating time in the corresponding menu. Several
submenus can be nested.