Siemens SINAMICS G180 - Description; Updating Inverter Software or Instructions; Order Numbers; Type Designations

Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
31
Description
3
3.1
Updating inverter software or instructions
These operating instructions are valid for SINAMICS G180, software version 00235-R16 and
higher.
Procedure
1. Check the current software version on the inverter display in the menu "I-INVERTER
DATA/Version".
2. If the inverter software version is higher than the version of the operating manual,
download the current version of the manual from this website (http://www.siemens.com).
3. If the inverter software is no longer current, then update the inverter software by using the
software "IMS".
Contact the Service Center of Siemens in Ruhstorf (Page 190) for more detailed information.
3.2
Order numbers / Type designations
The converters have the following types of identification:
● Order number
● Short designation
● Type code
● Other version designation