Preparations for use
4.1 Transporting inverter
Installation and Operating Instructions SINAMICS G180
72 Operating Instructions, 02/2019, 4BS0751-007
● Transport compact devices with cardboard packaging horizontally and cabinet equipment
with plastic bubble wrap upright on wooden pallet.
● Converters are highly sensitive electronic devices. Pay attention to the stickers and
warnings on the packaging.
● Only transport the equipment with modern, air suspension trucks on asphalt roads. If you
cannot comply with these conditions, package the devices in accordance with the special
requirements. Consult the factory for this, for example for marine packaging.
● Never lift the compact devices at the plastic cover, but always from below according to
the following diagrams.
Lifting compact devices - wrong
Lifting compact devices - correct
Damage to converters during transportation
When returning the unit, only transport it in the original packaging as otherwise the unit
could be damaged during transport which means that the warranty becomes null and void.
Risk of injury when lifting heavy loads
Compact units, depending on the type, from frame size K3, weigh more than 30 kg. Do not
try to manually lift devices more than 30 kg.
To Next Page
Loading...
