Siemens SINAMICS PERFECT HARMONY GH180 - CE Marking on Power Drive Systems (PDS)

C.3 CE Marking on Power Drive Systems (PDS)
The terminology used throughout IEC and EN standards relating to electrical VFDs is contained
in the IEC 61800 series of standards. The IEC 61800 series of standards references other
components of the PDS with respect to the VFD; however, those components are covered by
di󹪜erent IEC product relevant materials.
Note
As referenced in the 󹪝gure 1 of the IEC 61800-5-1 and 󹪝gure 2 of IEC 61800-2 installation, the
motor or any machinery, including gearboxes and the driven equipment, are outside of the
scope of Siemens LD's responsibility.
Siemens Industry, Inc. I DT LD SINAMICS Perfect Harmony™ GH180 designs always include the
Basic Drive Module (BDM) that includes a SINAMICS Perfect Harmony™ transformer, converter/
inverter (power cell) section, and control section. Depending on the Siemens Industry, Inc.
scope of supply (buyout), SINAMICS Perfect Harmony™ GH180 Complete Drive Module (CDM)
may include optional components, such as a motor excitation unit, output line 󹪝lter, output line
reactor, or earthing switches.
Quality
C.3 CE Marking on Power Drive Systems (PDS)
Type 6SR5 Air-Cooled
Operating Instructions, AK, A5E39390112 119