Siemens SINAMICS S 1PH7 - 1.2 Technical Features

Motor description
1.2 Technical features
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
19
1.2 1.2 Technical features
Table 1- 1 Technical features
Technical feature Version
Motor type Induction motor
Type of construction according to EN 60034–7
(IEC 60034–7)
IM B3, IM B5, IM B35 (see selection and ordering data)
Degree of protection acc. to EN 60034–5
(IEC 60034–5)
IP55 (fan IP54)
Cooling according to EN 60034–6 (IEC 60034–6) Forced ventilation; fan mounted axially at NDE
Fan supply voltage for separately driven fan 3-ph. 400 V AC, 50 Hz
3-ph. 400 V AC, 60 Hz
3-ph. 480 V AC, 60 Hz
Winding insulation acc. to EN 60034–1
(IEC 60034–1)
Temperature Class 155 (F) for a coolant temperature of +40 °C
Temperature monitoring acc. to EN 60034–11
(IEC 60034–11)
KTY 84 temperature sensor in stator winding
Motor voltage 3-ph. 400 V AC
3-ph. 480 V AC
Shaft height Airflow direction Sound pressure level dB(A)
70 100 NDE → DE
DE → NDE
70
70 132 NDE → DE
DE → NDE
70
72 160 NDE → DE
DE → NDE
75
73 180 NDE → DE
DE → NDE
73
74
Sound pressure level at 50 Hz
(acc. to ISO1680–1; EN 21680)
Tolerance + 3 dB(A)
225 NDE → DE
DE → NDE
76
Connection type Terminal box for power; top-mounted terminal box
Connector or DRIVE-CLiQ interface for signals
(mating connector is not included in the scope of supply)
Speed encoder, integrated for motors without
DRIVE-CLiQ interface
• without encoder
• Absolute encoder 2048 S/R singleturn, 4096 revolutions
multiturn, with EnDat interface (AM2048S/R encoder)
• Incremental encoder, sin/cos 1 Vpp, 2048 S/R with C and D
tracks (encoder IC2048S/R)
• Incremental encoder sin/cos 1 Vpp 2048 S/R with C and D
tracks (encoder IN2048S/R)
Speed encoder, integrated for motors with DRIVE-
CLiQ interface
• Incremental encoder 22 bit (resolution 4194304, internal 2048
S/R) + commutating position 11 bit (encoder IC22DQ)
• Absolute encoder 22 bit singleturn (resolution 4194304, internal
2048 S/R) + 12 bit multiturn (traversing range 4096 revolutions)
(encoder AM22DQ)
• Incremental encoder 22 bit (resolution 4194304, internal 2048
S/R), without commutating position (encoder IN19DQ)
Balancing acc. to IEC 60034–14 Standard: Balancing with half feather key, marked with H at the
shaft face; option: Full-key balancing (see Selection and ordering
data)