Motor components (options)
5.4 Gearbox
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
205
5.4.10 Connections, circulating oil lubrication, frame sizes 132 and 160
M
K
E
G
L
D
F
O
P
N
H
Figure 5-10 Selector gearbox with selector unit for frame sizes 132 and 160
Table 5- 11 Connections for circulating oil lubrication
Max. pressure Connection
Oil return
Connection
Oil inlet
Mounting position
2 bar H P (1.5 dm
3
/min) V3
0.5 bar
1.5 bar
1.5 bar
M (0.5 dm
3
/min)
N (1.5 dm
3
/min)
V1
(closed version)
1.5 bar
D
Main direction of
rotation
clockwise
1)
E
Main direction of
rotation
counter-clockwise
1)
G (1.5 dm
3
/min)
Main direction of rotation
clockwise
F (1.5 dm
3
/min)
Main direction of rotation
counter-clockwise
B5
V1
Note: Circulating oil lubrication is required for certain gearboxes and V1 or V3 vertical mounting
positions (refer to Chapter "Lubrication")
Connection O is additionally possible (0.5 dm
3
/min)
1)
When viewing the gearbox drive from the motor
To Next Page
Loading...
