Siemens SINAMICS S 1PH7 - Permissible Dimension Deviations

Motor components (options)
5.4 Gearbox
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
209
5.4.12 Permissible dimension deviations
Table 5- 17 Permissible dimension deviations
Dimension Permissible deviations
a, b up to 250 mm
from 250 mm to 500 mm
from 500 mm to 750 mm
±0.75 mm
±1.0 mm
±1.5 mm
b
1
up to 230 mm
over 230 mm
DIN 7160 j6
h6
d, d
1
up to 11 mm
from 11 mm to 50 mm
over 50 mm
DIN 7160 j6
k6
m6
e
1
up to 200 mm
from 200 mm to 500 mm
±0.25 mm
±0.5 mm
h from 50 mm to 250 mm DIN 747
from 250 mm to 500 mm
–0.5 mm
–1.0 mm
i, i
1
, i
2
up to 85 mm
from 85 mm to 130 mm
from 130 mm to 240 mm
±0.75 mm
±1.0 mm
±1.5 mm
u, t, u
1
, t
1
acc. to DIN 6885 Sheet 1