Siemens SINAMICS S 1PH7 - 1.3 Selection and Ordering Data

Motor description
1.3 Selection and ordering data
1PH7 induction motors (Machine tools)
22 Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
1.3 1.3 Selection and ordering data
Shaft
height
Rated
speed
Continuous speed,
max.
Speed, max.
1)
Rated power for duty type
in accordance with IEC 60034-1
1PH7 asynchronous motor
with solid shaft
Forced ventilation
SH n
rated
n
S1 cont.
2)
n
S1 cont.
3)
n
max
n
max
4)
P
rated
Order No.
Core type
S1 S6-60% S6-40% S2-30 min
rpm rpm rpm rpm rpm kW
(HP)
kW
(HP)
kW
(HP)
kW
(HP)
100 2000 5500 – 9000 – 7 (9.39) 8.5 (11.4) 10 (13.4) 9.25 (12.4) 1PH7103 - 󰩛 󰩛 G02 - 0C󰩛 0
1500 5500 – 9000 – 9 (12.1) 11 (14.8) 13 (17.4) 12 (16.1) 1PH7107 - 󰩛 󰩛 F02 - 0C󰩛 0
132
1000
2000
4500 – 8000 – 12 (16.1)
20 (26.8)
15 (20.1)
25 (33.5)
18.5 (24.8)
30 (40.2)
16 (21.5)
27.5 (36.9)
1PH7133 - 󰩛 󰩛 D02 - 0C󰩛 0
1PH7133 - 󰩛 󰩛 G02 - 0C󰩛 0
1000
2000
4500 – 8000 – 17 (22.8)
28 (37.6)
20.5 (27.5)
35 (46.9)
25 (33.5)
43 (57.7)
22.5 (30.2)
39 (52.3)
1PH7137 - 󰩛 󰩛 D02 - 0C󰩛 0
1PH7137 - 󰩛 󰩛 G02 - 0C󰩛 0
160
1000
1500
3700 – 6500 – 22 (29.5)
30 (40.2)
27 (36.2)
37 (49.6)
33 (44.3)
45 (60.4)
30 (40.2)
41 (55.0)
1PH7163 - 󰩛 󰩛 D03 - 0C󰩛 0
1PH7163 - 󰩛 󰩛 F03 - 0C󰩛 0
1500 3700 – 6500 – 37 (49.6) 46 (61.7) 56 (75.1) 51 (68.4) 1PH7167 - 󰩛 󰩛 F03 - 0C󰩛 0
Fans: External fan unit, heavy-gauge threaded cable entry in terminal box
External fan unit, metric cable entry in terminal box
2
7
Encoder systems for motors
without DRIVE-CLiQ
interface:
Incremental encoder sin/cos 1 V
pp
without C and D track N
Encoder systems for motors
with
DRIVE-CLiQ
interface:
Incremental encoder 22 bit Q
Type:
5)
IM B5 (IM V1, IM V3)
IM B35 (IM V15, IM V35)
6)
2
3
Shaft extension (DE):
5)
Fitted key
Plain shaft
Balancing:
Half-key
–
Direction of air flow (fan):
DE → NDE
DE → NDE
Blow-out direction:
Axial
Axial
A
J