Configuration
2.1 Configuring software
1PH7 induction motors (Machine tools)
40 Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
The SIZER user interface is available in German and English. The drive configuration is
saved in a project. In the project, the components and functions used are displayed in a
hierarchical tree structure. The project view permits the configuration of drive systems and
the copying/inserting/modifying of drives already configured.
The configuration process produces the following results:
● Parts list of components required (Export to Excel)
● Technical specifications of the system
● Characteristics
● Comments on system reactions
● Location diagram of drive and control components and dimension drawings
These results are displayed in a results tree and can be reused for documentation purposes.
User support is provided by technological online help, which provides the following
information:
● Detailed technical data
● Information about the drive systems and their components
● Decision-making criteria for the selection of components.
Minimum system requirements
● PG or PC with Pentium™ II 400 MHz (Windows™ 2000), Pentium™ III 500 MHz
(Windows™ XP)
● 256 MB RAM (512 MB recommended)
● At least 1.7 GB of free hard disk space
● An additional 100 MB of free hard disk space on Windows system drive
● Monitor resolution, 1024×768 pixels
● Windows™ 2000 SP2, XP Professional SP1, XP Home Edition SP1
● Microsoft Internet Explorer 5.5 SP2
Order number for SIZER
Table 2- 1 Order number for SIZER
Engineering tool Order number (MLFB)
SINAMICS MICROMASTER SIZER
German/English
6SL3070-0AA00-0AG0
To Next Page
Loading...
