Siemens SINAMICS S 1PH7 - 3.8 Vibration Severity Level

Mechanical properties of the motors
3.8 Vibration severity level
1PH7 induction motors (Machine tools)
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
83
3.8 3.8 Vibration severity level
The 1PH7 motors conform to vibration severity level A in accordance with EN 60034-14
(IEC 60034-14). The values indicated refer only to the motor. These values can be increased
at the motor due to the overall vibration characteristics of the complete system after the drive
has been mounted.
The motors comply with the vibration severity level A up to rated speed n
N
.
Standard: Vibration severity level A/R
Option: Vibration severity level A/S or A/SR
9LEUDWLRQYHORFLW\
Y>PPV@
UPV
Q>USP@
/HYHO5
/HYHO65
/HYHO6











     





















Figure 3-21 Vibration severity limit values for induction motors SH 100 to 132.