Siemens SINAMICS S 1PH7 - Paint Finish; Vibration Severity Limit Values for Induction Motors SH 160 to 225

Mechanical properties of the motors
3.9 Paint finish
1PH7 induction motors (Machine tools)
84 Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
3HUPLVVLEOHYLEUDWLRQYHORFLW\
Y>PPV@
UPV
Q>USP@
/HYHO5
/HYHO65
/HYHO6





  

  















Figure 3-22 Vibration severity limit values for induction motors SH 160 to 225
3.9 3.9 Paint finish
1PH7 motors are supplied with the following paint finish:
● SH 100 to 160: Without paint finish or standard paint finish, anthracite RAL 7016
● SH 180 to 225: Primed or standard paint finish, anthracite RAL 7016
Other colors: Refer to the table "Technical features, options".
Note
Use in sub-tropical regions
The motors should be ordered with a "worldwide" paint finish if they are to be used in sub-
tropical regions or if they are to be transported by sea to prevent corrosion.