Siemens SINAMICS S Series - Page 1795

Index
D-1795
© Siemens AG 2007 All Rights Reserved
SINAMICS S List Manual (LH1), 07/2007
2479
ZSW1 status word 1 interconnection
(r0108.4 = 1), 2-1178
2480
MDIMode interconnection (r0108.4 = 1),
2-1179
2481
IF1 receive telegram, free interconnection
via BICO (p0922 = 999), 2-1180
2483
IF1 send telegram, free interconnection
via BICO (p0922 = 999), 2-1181
2485
IF2 receive telegram, free interconnection
via BICO (p0922 = 999), 2-1182
2487
IF2 send telegram, free interconnection
via BICO (p0922 = 999), 2-1183
2489
IF2 status words, free interconnection,
2-1184
2491
IF2 receive telegram, free interconnection
via BICO (p0922 = 999), 2-1185
2493
IF2 send telegram, free interconnection
via BICO (p0922 = 999), 2-1186
2501
Control word sequence control, 2-1188
2503
Status word sequence control, 2-1189
2505
Control word setpoint channel, 2-1190
2520
Control word speed controller, 2-1191
2522
Status word speed controller, 2-1192
2526
Status word, closed-loop control, 2-1193
2530
Status word,closed-loop current control,
2-1194
2534
Status word monitoring functions 1,
2-1195
2536
Status word monitoring functions 2,
2-1196
2537
Status word monitoring functions 3,
2-1197
2546
Control word, faults/alarms, 2-1198
2548
Status word, faults/alarms 1 and 2,
2-1199
2610
Sequencer, 2-1201
2634
Missing enable signals, line contactor
control, 2-1202
2701
Basic braking control (r0108.14 = 0),
2-1204
2704
Extended braking control, zero speed
detection (r0108.14 = 1), 2-1205
2707
Extended braking control, open/close
brake (r0108.14 = 1), 2-1206
2711
Extended braking control, signal outputs
(r0108.14 = 1), 2-1207
2800
Basic functions, parameter manager,
2-1209
2802
Basic functions, monitoring and
faults/alarms, 2-1210
2804
Basic functions, status words, 2-1211
2810
Basic functions, STO (Safe Stop Off)/SS1
(Safe Stop 1), 2-1212
2814
Basic functions,
SBC (Safe Brake Control), 2-1213
2825
Extended functions, SS1, SS2, SOS,
Internal STOP B, C, D, F, 2-1214
2840
Extended functions, control word and
status word, 2-1215
2846
Extended functions, parameter manager,
2-1216
2847
Extended functions, TM54F parameter
manager, 2-1217
2848
Extended functions, TM54F
configuration, F-DI/F-DO test, 2-1218
2850
Extended functions, TM54F
(F-DI 0 ... F-DI 4), 2-1219