Commissioning
4.11 Configuring brake control
Commissioning with Startdrive
Commissioning Manual, 11/2017, 6SL3097-4AA10-0BP1
299
Making settings for the brake feedback
Figure 4-122 Extended brake control: Configuring the feedback
1. Select the "[1] Yes" setting in the "Brake with feedback" (p1275.5) drop-down list.
The mask then expands downwards with the additional settings.
2. Interconnect the "Brake open feedback" (p1223) signal sink for the "Brake open"
feedback.
3. Interconnect the "Brake closed feedback" (p1222) signal sink for the "Brake closed"
feedback.
To Next Page
Loading...
