Siemens SINAMICS S200 - Page 207

• Scenario 1: A driv
e password has not been con󹪝gured as function "Drive data encryption" has
not been activated.
1 2 3
$SFBUFCBDLVQ꫼MF3FTUPSFESJWFEBUB
$POWFSUFS"$POWFSUFS"$POWFSUFS"
୫$IBOHFQBSBNFUFS
WBMVFT
– Click on "Restore".
The drive data are loaded int
o the converter from the backup 󹪝le.
As a consequence, the status of the settings at the instant of the backup are restored.
• Scenario 2: A drive password is con󹪝gured after the backup 󹪝le has been created.
1
2
3
$SFBUFCBDLVQ꫼MF3FTUPSFESJWFEBUB
$PO꫼HVSFEESJWFQBTTXPSE
$POWFSUFS"$POWFSUFS"$POWFSUFS"
୫$IBOHFQBSBNFUFS
WBMVFT
୫"DUJWBUFFODSZQUJPO



– Click on "Restore".
A dialog to enter the passw
ord opens.
– Enter the drive password.
The drive data are loaded into the converter from the backup 󹪝le.
As a consequence, the status of the settings at the instant of the backup are restored.
Function "Drive data encryption" is activated. The drive password con󹪝gured in step 2 is
still e󹪜ective in the converter after data has been restored.
Commissioning (web server)
7.4Functions and menus
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 205