Siemens SINAMICS S200 - Machinery Directive

9.8.10 Machinery Directive
Overview
The basic safe
ty and health requirements speci󹪝ed in Annex I of the Directive must be ful󹪝lled
for the safety of machines.
Description of function
The protective goals must be implemented responsibly to ensure compliance with the Directive.
Manufacturers of a machine must verify that their machine complies with the basic
requirements. This veri󹪝cation is facilitated by means of harmonized standards.
IEC61800‑5‑2 Adjustable-speed electrical power drive systems Part 5-2 is relevant for the
Machinery Directive: Safety requirements - Functional safety
Within the context of IEC61508, IEC61800‑5‑2 considers adjustable speed electric power
drive systems (PDS), which are suitable for use in safety-related applications (PDS(SR)).
IEC61800‑5‑2 places requirements on PDS(SR) as subsystems of a safety-related system. This
therefore permits the implementation of the electrical/electronic/programmable electronic
elements of a PDS(SR) taking into account the safety-relevant performance of the safety
function(s) of a PDS.
Manufacturers and suppliers of PDS(SR) can prove to users (e.g. integrators of control
systems, developers of machines and plants etc.) the safety-relevant performance of their
equipment by implementing the speci󹪝cations stipulated in standard IEC61800‑5‑2.
Functions
9.8Safety Integrated (for S200 PTI only)
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 293