EasyManua.ls Logo

Siemens SINAMICS S200 - Page 583

Siemens SINAMICS S200
764 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix
A
A.1 UL Markings
Descr
iption
Conver
ter variant of 1 AC/3 AC 200 V ... 240 V
For US/Canadian installations (UL/cUL): The products are cULus-listed under File E355661.
Suitable for use in a circuit that cannot provide more than 100kArms (symmetrical), max.
240V.
Note: The maximum permissible short-circuit current for 200 V variants with Type E
Combination Motor Controllers is 65kA.
Protection of the branch circuit for individual drives must be guaranteed using Class J fuses
in accordance with the technical data.
For other protection equipment and SCCRs (Short Circuit Current Rating) for individual
drives, see:
Protective Devices for SINAMICS S200 Product Line (
https://
support.industry.siemens.com/cs/ww/en/ps/29596/man)
This device must be inst
alled in an enclosure that provides an environment with degree of
pollution2 (controlled).
Maximum rated temperature 45°C.
The device provides overtemperature and overload protection.
Use copper wires with a permissible temperature of 75 °C for all power cables. You can also
use cables with a higher rated temperature value. It is not permissible to reduce the
conductor cross-section.
Converter variant of 3 AC 380 V ... 480 V
For US/Canadian installations (UL/cUL): The products are cULus-listed under File E355661.
Suitable for use in a circuit that cannot provide more than 65kArms (symmetrical), max.
480V.
Protection of the branch circuit for individual drives must be guaranteed using Class J fuses
in accordance with the technical data.
For other protection equipment and SCCRs (Short Circuit Current Rating) for individual
drives, see:
Protective Devices for SINAMICS S200 Product Line (
https://
support.industry.siemens.com/cs/ww/en/ps/29596/man)
This device must be inst
alled in an enclosure that provides an environment with degree of
pollution2 (controlled).
Maximum rated temperature 45°C. Maximum height 4000m.
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA 581

Table of Contents

Other manuals for Siemens SINAMICS S200

Related product manuals