Siemens SINAMICS S200 - Page 588

• c... Display parameters (read-only)
• p0972 Adjustable parameter 972
• p0489[0...2] Adjustable parameter 489, index0 to 2
• r0945 Display parameter 945
• r0196[0...255].0...15 Display parameter with index 0 to 255 and bit array from bit 0 to bit
15
• r5613.0...1 Display parameter 5613 with bit array from bit 0 to bit 1
• c8997[0...2] Display parameter 8997, index 0 to 2
Other examples of the notation in the documentation:
• p9563[1] Adjustable parameter 9563, index 1
• r0196[1].5 Display parameter 196, index 1, bit 5
• r0964[2] Display parameter 964, index 2
• p5611.1 Adjustable parameter 5611, bit 1
Parameter name
Sho
ws the parame
ter name in the long form.
Variant
Speci󹪝es the product variant for which the parameter is valid. This information is not
applicable if a parameter is the same for all product variants used in the parameter list.
Data type
Each parameter is assigned one of the following data types:
• Integer8 I8 8-bit integer
• Integer16 I16 16-bit integer
• Integer32 I32 32-bit integer
• Unsigned8 U8 8-bit without sign
• Unsigned16 U16 16-bit without sign
• Unsigned32 U32 32-bit without sign
• FloatingPoint32 Float 32-bit 󹪞oating-point number
Visible in
Y
ou change the number of par
ameters displayed in the commissioning tool via:
• Standard display
Only the basic parameters are displayed.
• Extended display
The full scope of parameters is displayed.
Permission
The user and rights management (UMAC) controls access to the parameters.
You require runtime function rights to read and set parameters.
The following read permissions are available:
• Read drive data or acknowledge messages
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
586 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA