Siemens SINAMICS S200 - Page 590

Description
Explanation of the function of a parameter
.
Value
List of the possible values of a parameter.
Recommendation
Information about recommended settings.
Index
Indexed parameters represent the name and its signi󹪝cance for each individual index.
The following applies to the values (Min, Max, Factory setting) of indexed adjustable
parameters:
• Min, Max:
The adjustment range and the unit apply to all indices.
• Factory setting:
When all indices have the same factory setting, index 0 is speci󹪝ed with the unit to represent
all indices.
When the indices have di󹪜erent factory settings, they are all listed individually with the unit.
Bit array
For parameters with bit 󹪝elds, the following information is provided about each bit:
• Bit number and signal name
• Meaning for signal states 0 and 1
• Function diagram (optional)
The signal is shown in the function diagram.
Dependency
Speci󹪝cation of interactions that this parameter can potentially have:
• E󹪜ect on other parameters
• Dependent on other parameter settings (dependent on the selected functions)
• List of other parameters to be considered
• List of faults and alarms to be considered
Danger/Caution/Warning/Notice
The safety-relevant notes correspond to the warning note concept and contain the following
information:
• Important information that must be observed to avoid the risk of physical injury or material
damage.
• Information that must be observed to avoid any problems.
• Information that the user may 󹪝nd useful.
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
588 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA