Result
You have disassembled the hybrid plug.
Note
The removal of contacts def
orms the signal unit case; therefore, the disassembled signal unit
case cannot be reused.
Siemens does not recommend that you reuse the disassembled power unit case. Before reusing
the power unit case, check to make sure that there is no deformation or damage.
A.4.2.3 Assembling connectors for 1FL2 motors, shaft heights 48 and 52
Overview
This section oer
s assembly instructions for power and encoder cables of the 1FL2 motors shaft
heights 48 and 52.
Requirement
You have prepared appropriate tools, raw cables, and the Siemens M17 connector.
Appendix
A.4Assembling cables
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
748 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA
To Next Page
Loading...
