Siemens SINAMICS SM120 - Suitable for Marine Use with Individual Certificate from Chinese Classification Society (CCS) (Option E71); Can Bus Interface (Option G20); CBE20 Communications Card for PROFINET (Option G24); Modbus RTU Slave Interface (Option G22)

3.4.22 Suitable for marine use with individual certificate from Chinese Classification
Society (CCS) (option E71)
This drive version meets the requirements of the Chinese Classification Society (CCS).
This option contains the following equipment/features:
● Strengthened mechanical cabinet design
● Handrail below the operator panel
● Mechanical cabinet door locking
● Cabinet design in an IP44 degree of protection
● Anti-condensation heating
The drive can be welded to the ship's hull structure.
See also
Anti-condensation heating (option L55) (Page 45)
3.4.23 Can Bus interface (option G20)
The standard version of the drive is equipped with a PROFINET interface (slave).
Communication Boards CBC10 and CBE20 are used to link the drive to the CANopen bus
system.
3.4.24 CBE20 communications card for PROFINET (option G24)
The CBE20 communication module allows the drive to be networked using PROFINET.
For more information on Communication Boards, see document "Supplementary component
descriptions."
3.4.25 Modbus RTU Slave interface (option G22)
This option includes an interface to the Modbus RTU third-party bus system.
3.4.26 DeviceNet interface (option G23)
This option includes an interface to the DeviceNet third-party bus system.
Description
3.4 Options
SINAMICS SM120 6SL38715
Operating Instructions 07/2015 39