Inverter
variant
Holes to be drilled
in cabinet wall
Fixing method Tightening
torque (Nm)
Frame Size D 10 4 x M8 screws and nuts (for fixing the inverter to the push-through
mounting kit) ; 2 x plastic rivets
2.5
8 x M5 screws and nuts (for fixing the inverter to cabinet wall) 2.5
4 x M4 screws (for fixing the metal back cover to the back of inverter) 0.8
Installation
5.1 Mechanical installation
SINAMICS V10
28 Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
To Next Page
Loading...
