Siemens SINUMERIK 804D sl Programming Manual

The position on the contour is saved as interrupt position where the LIFTFAST motion is
started and therefore the path was left.
The interrupt routine with LIFTFAST and ALF=0 behaves in precisely the same way as the
interrupt routine without LIFTFAST.
Note
The absolute value through which the geometry axes move when quickly retracting from the
contour can be set using machine data.
Work preparation
3.3 Interrupt routine (ASUB)
NC programming
550 Programming Manual, 12/2019, 6FC5398-2EP40-0BA0

Siemens SINUMERIK 804D sl Specifications

General

Brand	Siemens
Model	SINUMERIK 804D sl
Category	Control Systems
Language	English