Siemens SINUMERIK 810DE - Page 417

Tables
12.1 List of statements
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
12-11
G810
1
,
...,
G819
G group reserved for the OEM 31
G820
1
,
...,
G829
G group reserved for the OEM 32
G931 Feedrate specified by travel time Travel time m 15
G942 Freeze linear feedrate and constant cutting rate or spindle
speed
m 15
G952 Freeze revolutional feedrate and constant cutting rate or
spindle speed
m 15
G961 Constant cutting speed (as for G94) ON Feedrate
type
G961 S... LIMS=... F... m 15
G962 Linear or revolutional feedrate and constant cutting rate m 15
G971 Constant cutting speed (as for G94) OFF Feedrate
type
m 15
G972 Freeze linear or revolutional feedrate and constant spindle
speed
m 15
GOTO
F
Jump forwards (toward the end of the program)
GOTO
B
Jump backwards (toward the start of the program)
GWPS
OF
Deselect constant grinding wheel peripheral speed (GWPS) GWPSOF(T No.) s
GWPS
ON
Select constant grinding wheel peripheral speed (GWPS) GWPSON(T No.) s
H... Auxiliary function output to the
PLC
Real/INT
progr.:
REAL :
±3,4028-
ex38
INT:
-2147483
648
+2147483
648
Display:
±999 999
999,9999
settable via
machine data
(machine
manufacturer)
H100 or H2=100
I
4
Interpolation parameters Real s
I1 Intermediate point coordinate Real s
IC Incremental dimensioning 0, ...,
±99999.9
99°
X=IC(10) s
INCW Travel on a circle involute in CW
direction with interpolation of
involute by G17/G18/G19
Real End point:
Center point:
Radius with
INCW/INCCW X... Y...
Z...
INCW/INCCW I... J...
m 1