Tables
12.1 List of statements
Fundamentals
Programming Manual, 10.2004 Edition, 6FC5 298-7AB00-0BP1
12-15
OS Oscillation on/off Integer,
w/o signs
OSC
6
Continuous tool orientation smoothing m 34
OSCILL Axis assignment for oscillation-
activate oscillation
Axis: 1 - 3 infeed
axes
m
OSCTRL Oscillation control options Integer,
w/o signs
m
OSB Oscillating: Start point mF
OSE Oscillating: End point m
OSNSC Oscillating: Number of spark-out
cycles
(oscillating: number spark-out
cycles)
m
OSOF
1,6
Tool orientation smoothing OFF m 34
OSP1 Oscillating: Left reversal point
(oscillating: position 1)
Real m
OSP2 Oscillating: Right reversal point
(oscillating: position 2)
Real m
OSS
6
Tool orientation smoothing at end of block m 34
OSSE
6
Tool orientation smoothing at start and end of
block
m 34
OST1 Oscillating: Stopping point in left
reversal point
Real m
OST2 Oscillating: Stopping point in right
reversal point
Real m
OVR Speed override 1, ...,
200%
m
OVRA Axial speed override 1, ...,
200%
m
P Number of subprogram passes 1, ...,
9999,
integers
w/o signs
e.g., L781 P...
;separate block
PAROTOF Deactivate workpiece-related frame rotation m 52
PAROT Align workpiece coordinate system on
workpiece
m 52
PDELAYOF
6
Punch with delay OFF
m 36
PDELAYON
1.6
Punch with delay ON
m 36
PL Parameter interval length Real, w/o
signs
s
POLY
5
Polynomial interpolation m 1
PON
6
Punch ON m 35
PONS
6
Punch ON in IPO cycle (punch ON slow) m 35
To Next Page
Loading...
